Classic Car Leds
Jensen Interceptor MKIII LED Bulb Upgrade Kits
Jensen Interceptor MKIII LED Bulb Upgrade Kits
Couldn't load pickup availability
Having worked closely on a number of MKIII Interceptors and fitted these kits, we have produced simple kits to upgrade all the standard fit bulbs for your car. The hyperlinks below will take you to the individual recommended products should you wish to part upgrade. The kits comprise of the following and is for a UK Specification vehicle.
When ordering, please make it clear in the notes section available when viewing your shopping cart which colours you need where options are given or send us an email to sales@classiccarleds.co.uk with the details. Your order cannot be shipped until these details are received.
Fitting | Lucas Reference | Colour Options | No Req'd |
Headlight Bulbs | |||
Main and Dipped Outer | H4 or H1 | White, Warm White | 2 |
Main Inner | H1 | White, Warm White | 2 |
Exterior Bulbs | |||
Sidelights | 989 | White, Warm White | 2 |
Indicators | 382 | Amber | 4 |
Indicator Flasher Relay | 2 pin | N/A | 1 |
Hazard Flasher Relay | 2 pin | N/A | 1 |
Side Flasher - Later Fit Only (wide Lens) | 989 | Warm White (best behind a small amber lens) | 2 |
Stop Tail | 380 | Red | 2 |
Number Plate | 207 | White, Warm White | 2 |
Reversing Light | 382 | White, Warm White | 2 |
Interior Bulbs | |||
Boot Light | 42mm |
|
1 |
Engine Bay Light | 42mm |
|
1 |
Engine Inspection | 989 |
|
1 |
Interior Door Pillar Lamps | 38mm |
|
2 |
Panel Illumination (above switches) | 987 |
|
2 |
Indicator Warning Lights | 281 | Green | 2 |
Clock | 281 |
|
1 |
|
987 |
|
4 |
Speedometer | 987 |
Green |
1 |
Main Beam Warning | 987 | Blue | 1 |
Oil Warning Light | 987 | Red | 1 |
Fuel Flap Warning | 987 | Warm White | 1 |
Rev Counter | 987 |
Green |
1 |
Gear Quadrant | 501 |
|
2 |
Seat Belt Warning | 987 |
|
2 |
Temperature and Fan Selector Illumination | 987 |
Green |
2 |
Cigar Lighter | 989 |
|
1 |
Door Warning Light | 989 |
|
2 |
Glove Box Interior | 987 |
Green |
1 |
Steering Lock Illumination | 281 | White, Warm White, Blue, Green, Red | 1 |
Brake Warning Light and Test Switch | Not recommended to replace | ||
Alternator Warning | Not recommended to replace |
THE LEDS SUPPLIED WILL BE STANDARD REPLACEMENT FITTINGS AS FITTED BY THE FACTORY. IF YOU HAVE NEWER UPGRADED FITTINGS SUCH AS T10 INSTEAD OF THE E10MES SCREW PLEASE LET US KNOW WHICH YOU NEED.
A fitting hints and tips sheet will be sent with any order to assist with fitting any bulbs that are not obvious to get to. All LEDs will be supplied and marked as to where they fit to avoid any confusion.
If you need anything changed on this list, please call us on 0800 246 5678 or send us an email to sales@classiccarleds.co.uk and we will be pleased to help.
Headlight bulbs have H4 or H1 for outer and H1 fitting for inner. Please check the fittings that your current headlamp units will accept them. If they are sealed beam units, you will need to upgrade them.
All prices shown exclude UK and EU VAT which will be added at checkout together with postage where appropriate.
Generic Part Number: JENINTKIT
